Metra-electronics 99-7606 Instrukcja Użytkownika

INSTALLATION INSTRUCTIONS FOR PART 99-7606Torx T-10 Driver • Small Flat Blade Screwdriver • Phillips Screwdriver 1-800-221-0932 www.metrao

8FINAL ASSEMBLYMake wiring connections using the EIA color code chart shown below and the instructions included with the headunit. Metra recommends ma

9NOTES99-7606

99-7606 INSTRUCTIONS1-800-221-0932 www.metraonline.comREV. 02/22/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION I

TABLE OF CONTENTS99-7606•Dash Disassembly- Nissan Titan 2006 -07...1, 2- Nissan Pathfinde

199-7606DASH DISASSEMBLYOFFABCDisconnect the negative battery terminal to prevent an accidentalshort circuit.1Unclip and remove entire panelincluding

299-7606DASH DISASSEMBLYUnclip and remove the Hazard Lightswitch assembly. (Figure D)6Remove (2) T10 Torx screws fromthe passenger air bag off lightas

399-7606PRE-KIT ASSEMBLYAttach the passenger air bag off lightassembly to the 99-7606 RadioHousing using the factory hardwareremoved in the dash disas

499-7606KIT ASSEMBLYSnap the pocket into the radio housing. (Figure C)3Slide the DIN cage into the RadioHousing and secure by bendingthe metal locking

599-7606KIT ASSEMBLYSnap the pocket into the radio hous-ing.(Figure D)4Slide the radio into the radioopening until the side clipsengage. (Figure B)2Sn

699-7606KIT ASSEMBLYSlide the Double DIN radio into theDouble DIN bracket/radio housingassembly and secure the radio to thekit using the screws suppl

799-7606KIT ASSEMBLYSnap the Double DIN trim-plate ontothe housing/radio assembly.(Figure C)4Snap the Double DIN brackets tothe inside edge of the rad